That means you can sometimes take a tray from a Navara, and fit it to a Hilux, and so forth. On that note, you can also often get away with fitting a canopy off a different make as long as the dimensions are similar. These tend to start off at around $2200 and work their way up to $5000 for a high end unit, but you can pick them up second hand for a lot less. There are lots of variations to these though you can get them with windoors on the side (yes, a cross between a window and a door), sliding windows, fixed doors or none at all. These usually have 4 windows, with the rear one lifting up on gas struts. ![]() Probably the most common is the standard fibreglass unit, which is made by the likes of Flexiglass, Carryboy, TJM, ARB and also the vehicle manufacturers. If you choose to go down the well body canopy path, you can install a few different options. The chassis mount canopies and trays are also easy to remove, although some of them can be extremely heavy and require the assistance of an overhead crane, forklift or other machinery. Ute tubs are generally held down by 6 bolts, and once you disconnect the fuel filler flap and hoses they lift off with a few mates (anywhere from 50 – 120kg). That said, its not something you’d want to do regularly you generally pick the direction you want to go and stick with it! It’s really not difficult to swap between the 3 bases above, providing you have some mechanical skills and are able to move and adjust brackets as required. If you are going to get rid of one, keep the lights and tailgate and sell them on.Ī chassis mount canopy, where the tray is part of the canopy Swapping between the 3 bases Hundreds of these are removed and scrapped every week for people fitting steel or aluminium trays, with the most valuable part being the tailgate and rear lights. The tubs themselves are not worth very much, and you can generally pick up a second hand one in good condition for a few hundred dollars at most. You can attach a range of canopies to the top of these to store your gear. These are the panel style tubs that blend in with the Ute panels. Well body or TubĪ significant number of 4WD Utes come from the factory with a well body, tub, or style side arrangement. You can swap between these options fairly easily in the beginning, but once you’ve bought a canopy to suit one of the 3 below it gets a lot harder and more expensive. If you are going to install a Ute Canopy, you only have three bases to choose from which then branch off into numerous other options.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |